ZUBI wireless control kit for 3D Printer

The spreading of 3D printers is giving hint to the creativity of many
people, including myself, it's great to draw an object and then send it
to to the printer, you will be fascinated to see how a thin wire, like
raw material, fluid materialize your idea.

It would be great if our 3D Printer can be remotely controlled from
the office or from our car, check the progress of work and even stop in
case of emergency.

Zubi is the cheap and DIY solution.
Project has been present at Rome Maker Faire in october 2014 .
After test compatibility Zubi will be soon available in kit for everyone and for Workshop in Fablabs

NOW available on http://www.118volt.it/store/kit/

More info on www.pic-ap-board.eu

IWCNC Open hardware project for light multipurpose CNC

IwCNC? (Light Multipurpose CNC)

Project is a structure for 3-axis CNC, replicable and open source; simple, light, cheap and clean, for a hobby use / home use, able to use various tools, easily replaceable (drills, syringes for food and other materials, pen for writing, low power laser for small incisions), with suction of waste materials and can be stored in a special laser cutted suitcase.
The project evolution provides the possibility of became a 3D printer by replacing the tool with an extruder.
The project is based on GRBL for the control software of the movement, for the mechanical parts are used cheap and readily available materials, such as profiles T-slot aluminum, nylon wheels on standard bearing 626ZZ, and 3D printed supports. The electronics are built on double side pcb in through hole technology, easy to solder, key components are an Arduino Nano and 3 motor driver Stepstick 4988 with extensions pins to enable / disable the tools or tools to manage fan and accessories.
A project inside Fablab Roma Makers by TNT Team
Bruno Luziatelli, Gian Luigi Perrella, Mauro Manco

https://www.youtube.com/watch?v=hA3nW7xMKUc



More info on:
http://tntgroup.romamakers.org/doku.php?id=iwcnc

3D Webfier on Fa)(a demo

First 3d print test on wireless mode.
Gcode file wireless trasferred from Pronterface to the Falla 3d Printer.
Used 3D Webfier acting as USBtoWifi bridge

3DWebFier Project - the spreading of 3D printers is giving hint to the creativity of many people, including myself, it's great to draw an object and then send it to to the printer, you will be fascinated to see how a thin wire, like raw material, fluid materialize your idea.

Project accepted to MFR14 (Maker Faire Rome 2014)

 

more on 3dwebfier

IwCNC? (Light Multipurpose CNC)

The project is a structure for 3-axis CNC, replicable and open source; simple, light, cheap and clean, for a hobby use / home use, able to use various tools, easily replaceable (drills, syringes for food and other materials, pen for writing, low power laser for small incisions), with suction of waste materials and can be stored in a special laser cutted suitcase.

The project evolution provides the possibility of became a 3D printer by replacing the tool with an extruder.  

The project is based on GRBL for the control software of the movement, for the mechanical parts are used cheap and readily available materials, such as profiles T-slot aluminum, nylon wheels on standard bearing 626ZZ, and 3D printed supports.

The electronics are built on double side pcb in through hole technology, easy to solder, key components are an Arduino Nano and 3 motor driver Stepstick 4988 with extensions pins to enable / disable the tools or tools to manage fan and accessories.

A project ideated inside the Fablab Roma Makers by TNT Team
Bruno Luziatelli
Gian Luigi Perrella
Mauro Manco

stay tuned on

IwCNC? (Light Multipurpose CNC)